Ryggekamera adapter – Citroen og Peugeot med 7″ SMEG navigasjonsskjerm
3,998.00 kr
No special coding is needed as the interface integrates with the LVDS cable behind the vehicle head unit. The rear camera will activate as soon as reverse gear is engaged. The front camera will only activate if reverse gear is selected and then immediately afterwards drive forward gear is selected. The interface has a feature to allow manual activation of the front camera, this is done by pressing and holding the LIST button on the steering wheel, this feature also allows the front camera input to be used as a general video input for DVD and other video devices.
Peugeot 208 (2013 – 2016)
Peugeot 2008 (2013 – 2016)
Peugeot 308 (2013 – 2016)
Peugeot 408 (2013 – 2016)
Peugeot 508 (2014 – 2016)
Citroen C3 2013 >
Citroen C4 2013>
Citroen C5 2013>
Installation
Ignition must be turned off before installing the interface. The plug and play quadlock harness is connected behind the car’s original radio.
Set the dip switches on the unit first before powering the interface. If changing the dip switches you must power down the interface first.
On manual cars you may need to connect a cable from the interface to a reverse trigger wire such as the reverse light feed.
INSTALLATION INSTRUCTIONS
WHAT IS SMEG?
SMEG is one of Peugeot’s factory fitted navigation systems. Also identified as SMEG/ SMEG+/ DS Connect Nav Touch, the system features a 7 inch touch screen monitor with a 4pin HSD LVDS standard quadlock
Car models: The years stated refer to the model’s years of manufacture, please check the item description for information about any changes there may be within these productions years.
Citroën – C3 (2nd GEN) (2010 – 2016 )
Citroën – C4 (2nd GEN) (2011 – 2018)
Citroën – C4 Cactus* (2014 >)
Citroën – C4 Picasso (2nd GEN) (2013 >)
Citroën – C5 (2nd GEN) RD/TD (2008 – 2017)
Citroën – DS 3 (2010 – 2019)
Citroën – DS 4 (2011 – 2018)
DS Automobiles – DS 3 (2016 – 2019)
DS Automobiles – DS 4 (2015 – 2018)
Peugeot – 2008 (1st GEN Facelift) (2016 – 2019)
Peugeot – 2008 (1st GEN) (2013 – 2016)
Peugeot – 208 (2012 >)
Peugeot – 308 (2nd GEN) T9 (2013 >)
Peugeot – 408 2nd Gen (2014 >)
Peugeot – 508 (1st Gen) * (2010 – 2018
For biler med Quadlock
2 på lager